Remote 840 SDSL Router User's Guide

2-6
C
HAPTER
2: S
YSTEM
A
DMINISTRATION
4 Repeat steps 1-3 for each management station which is a part of this
community.
Be careful to have the Access box checked the same for each new
member of the community.
The entire community will be given the access rights of the last member.
5 To alter previously set Access Rights, follow step 1 and select the
community from the community list and click Modify.
6 To delete a management station from a community, go to the home page
and, select Configuration > Global > Administrator > SNMP. Select
the community and management station from the lists and click Delete.
Controlling TFTP
Access
The Trivial File Transfer Protocol (TFTP) provides a simple way to
transfer files from one machine to another. The OfficeConnect Remote
840 has a TFTP server that allows you to copy files to or from the unit. All
you have to do is set up TFTP access on the OfficeConnect Remote 840
and run a TFTP client program on a workstation. TFTP transfers files over
either the LAN or WAN interfaces.
To configure the OfficeConnect Remote 840 to provide TFTP access,
follow the instructions below:
1 From the home page, select Configuration > Global > Administrator
> TFTP. Click Add and the following fields appear:
2 Enter the address of the client workstation or select Any Client for
unrestricted client access.
3 After the fields have been entered, click Submit. To clear the fields, click
Reset.
840ug.book Page 6 Friday, July 7, 2000 2:23 PM