Remote 840 SDSL Router User's Guide

11-14

HAPTER

11: M

ONITORING

THE

FFICE

ONNECT

EMOTE

840

configured statically. The protocol type of RIP indicates routes that were

learned from IPX RIP information exchange with other routers.

IPX Services The IPX services table contains the list of all IPX servers known to the

OfficeConnect Remote 840. To view the IPX services table, go to the

OfficeConnect Remote 840 Manager home page and select Monitor >

Routes and Services > IPX Services.

The services table contains statically configured services as well as those

learned through SAP. If the server type is a well known type, it is displayed

in text, otherwise its hex value is displayed.

Bridge

Bridge Networks Bridge networks are created when you configure bridging over the LAN

and when a remote site connection is established that is configured to

bridge traffic. To view the list of bridge networks and their status, bring

up the Network Status screen. This screen lists the status of all

OfficeConnect Remote 840 IP, IPX, and bridge networks. To see this

screen, from the OfficeConnect Remote 840 Manager home page, select

Monitor > Networks > Network Status.

The network status table shows the network name, the protocol, the

interface over which the network runs (eth:1 for LAN, atm:1 or hdlc:1

for WAN), how the network was created (static for LAN, dynamic for

WAN) and the network address assigned to the connection.

Name NetSum Node Socket Type Prot Metric

AM-STATION! 00000020 00:a0:c9:lf:cc:d3 0451 File Server SAP Z

ISC 00000020 00:a0:c9:lf:ce:d9 0555 67b SAP 2

840ug.book Page 14 Friday, July 7, 2000 2:23 PM