Operation Manual

Chapter 5 Powerline Network Setup Tutorial
PLA Series User’s Guide
42
The figure below shows the family computer with Internet access on a powerline network. Expand
the network by adding a new powerline adapter connected to a printer.
Figure 22 Add a Printer to Your Powerline Network
Note: You do not need to know the network name of the new adapter to add it to your
network.
1 Connect your computer to the powerline adapter you want to add to your network and open the
ZyXEL PLA Series Configuration utility (see Section 5.3 on page 41).
2 Go to the Configuration screen. On this screen in the Site column your new powerline adapter
should appear as Local (A). Check the Local adapter’s MAC address (B). It should match the MAC
address listed on the label on the back of your powerline adapter.
Figure 23 Adding a New Adapter
A
B