Owner's Manual

Chapter 7 Router Mode
NBG5615 User’s Guide
60
7.2.1 Navigation Panel
Use the sub-menus on the navigation panel to configure NBG5615 features.
Packet Statistics Click Details... to go to the Monitor > Packet Statistics screen (Section 10.5 on page
91). Use this screen to view port status and packet specific statistics.
WLAN 2.4G Station
Status
Click Details... to go to the Monitor > WLAN 2.4G Station Status screen (Section 10.6
on page 92). Use this screen to view the wireless stations that are currently associated to
the NBG5615’s 2.4GHz wireless LAN.
WLAN 5G Station Status Click Details... to go to the Monitor > WLAN 5G Station Status screen (Section 10.6 on
page 92). Use this screen to view the wireless stations that are currently associated to the
NBG5615’s 5GHz wireless LAN.
System Status
Item This column shows the type of data the NBG5615 is recording.
Data This column shows the actual data recorded by the NBG5615.
System Up Time This is the total time the NBG5615 has been on.
Current Date/Time This field displays your NBG5615’s present date and time.
System Resource
- CPU Usage This displays what percentage of the NBG5615’s processing ability is currently used. When
this percentage is close to 100%, the NBG5615 is running at full load, and the throughput is
not going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using bandwidth management.)
- Memory Usage This shows what percentage of the heap memory the NBG5615 is using.
Interface Status
Interface This displays the NBG5615 port types. The port types are: WAN, LAN and WLAN.
Status For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the 2.4GHz/5GHz WLAN, it displays Up when the 2.4GHz/5GHz WLAN is enabled or
Down when the 2.4G/5G WLAN is disabled.
Rate For the LAN ports, this displays the port speed and duplex setting or N/A when the line is
disconnected.
For the WAN port, it displays the port speed and duplex setting if you’re using Ethernet
encapsulation. This field displays N/A when the line is disconnected.
For the 2.4GHz/5GHz WLAN, it displays the maximum transmission rate when the 2.4GHz/
5GHz WLAN is enabled and N/A when the WLAN is disabled.
Table 25 Status Screen: Router Mode (continued)
LABEL DESCRIPTION