Owner's Manual

Chapter 21 Remote Management
NBG5615 User’s Guide
175
21.5 Telnet Screen
To change your NBG5615’s remote management settings, click Management > Remote MGMT >
Telnet to open the Telnet screen.
Figure 103 Management > Remote MGMT > Telnet
The following table describes the labels in this screen.
21.6 Wake On LAN Screen
Wake On LAN (WoL) allows you to remotely turn on a device on the network, such as a computer,
storage device or media server. To use this feature the remote hardware (for example the network
adapter on a computer) must support Wake On LAN using the “Magic Packet” method.
You need to know the MAC address of the remote device. It may be on a label on the device.
Table 72 Management > Remote MGMT > Telnet
LABEL DESCRIPTION
Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Access Status Select the interface(s) through which a computer may access the NBG5615 using
this service.
Secured Client IP
Address
Select All to allow all computes to access the NBG5615.
Otherwise, check Selected and specify the IP address of the computer that can
access the NBG5615.
Apply Click Apply to save your customized settings.
Cancel Click Cancel to begin configuring this screen afresh.