User Guide

ZyAIR G-1000 Access Point

3 Setting Up Your Computer’s IP Address

Skip this section if your computer’s IP address is already in the range of

192.168.1.3 ~ 192.168.1.254 with subnet mask 255.255.255.0.

Your computer must have a network card and TCP/IP installed. TCP/IP should already be installed on

computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems.

3.1 Windows 2000/NT/XP

1. In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings,

Control Panel.

2. In Windows XP, click Network Connections.

In Windows 2000/NT, click Network and Dial-up Connections.

3. Right-click Local Area Connection and then click Properties.

4. Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties.

5. The Internet Protocol TCP/IP Properties

screen opens (the General tab in

Windows XP).

Configure your computer to use a static IP

address, select Use the following IP

Address and fill in the IP address

(192.168.1.3 to 192.168.1.254) and

Subnet mask (255.255.255.0) fields.

6. Leave the Preferred DNS sever and Alternate DNS server fields blank if you do not know the

IP address(es) of the DNS server.

7. Click OK to close the Internet Protocol (TCP/IP) Properties window.

8. Click OK to close the Local Area Connection Properties window.