User manual

Appendix A Log Descriptions
ZyWALL USG 300 User’s Guide
955
The policy route %d
uses empty user group!
Use an empty object group.
%d: the policy route rule number
The policy route %d
uses empty source
address group!
Use an empty object group.
%d: the policy route rule number
The policy route %d
uses empty destination
address group!
Use an empty object group.
%d: the policy route rule number
The policy route %d
uses empty service
group
Use an empty object group.
%d: the policy route rule number
Policy-route rule %d
was inserted.
Rules is inserted into system.
%d: the policy route rule number
Policy-route rule %d
was appended.
Rules is appended into system.
%d: the policy route rule number
Policy-route rule %d
was modified.
Rule is modified.
%d: the policy route rule number
Policy-route rule %d
was moved to %d.
Rule is moved.
1st %d: the original policy route rule number
2nd %d: the new policy route rule number
Policy-route rule %d
was deleted.
Rule is deleted.
%d: the policy route rule number
Policy-route rules
were flushed.
Policy routing rules are cleared.
BWM has been
activated.
The global setting for bandwidth management on the ZyWALL
has been turned on.
BWM has been
deactivated.
The global setting for bandwidth management on the ZyWALL
has been turned off.
Table 285 Built-in Services Logs
LOG MESSAGE DESCRIPTION
User on %u.%u.%u.%u
has been denied access
from %s
HTTP/HTTPS/TELNET/SSH/FTP/SNMP access to the device
was denied.
%u.%u.%u.%u is IP address
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET
HTTPS certificate:%s
does not exist. HTTPS
service will not work.
An administrator assigned a nonexistent certificate to HTTPS.
%s is certificate name assigned by user
Table 284 Policy Route Logs (continued)
LOG MESSAGE DESCRIPTION