User manual

Chapter 50 System
ZyWALL USG 300 User’s Guide
847
50.9 FTP
You can upload and download the ZyWALL’s firmware and configuration files using
FTP. To use this feature, your computer must have an FTP client. Please see
Chapter 52 on page 873 for more information about firmware and configuration
files.
50.9.1 Configuring FTP
To change your ZyWALL’s FTP settings, click Configuration > System > FTP tab.
The screen appears as shown. Use this screen to specify from which zones FTP can
# This the index number of the service control rule.
The entry with a hyphen (-) instead of a number is the ZyWALL’s (non-
configurable) default policy. The ZyWALL applies this to traffic that does
not match any other configured rule. It is not an editable rule. To apply
other behavior, configure a rule that traffic will match so the ZyWALL will
not have to use the default policy.
Zone This is the zone on the ZyWALL the user is allowed or denied to access.
Address This is the object name of the IP address(es) with which the computer is
allowed or denied to access.
Action This displays whether the computer with the IP address specified above
can access the ZyWALL zone(s) configured in the Zone field (Accept) or
not (Deny).
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to return the screen to its last-saved settings.
Table 244 Configuration > System > TELNET (continued)
LABEL DESCRIPTION