User manual

Chapter 4 Installation Setup Wizard

ZyWALL USG 300 User’s Guide

4.1.3 Internet Access: PPPoE

Note: Enter the Internet access information exactly as given to you by your ISP.

Figure 30 Internet Access: PPPoE Encapsulation

4.1.3.1 ISP Parameters

• Type the PPPoE Service Name from your service provider. PPPoE uses a service

name to identify and reach the PPPoE server. You can use alphanumeric and -

_@$./ characters, and it can be up to 64 characters long.

• Authentication Type - Select an authentication protocol for outgoing

connection requests. Options are:

• CHAP/PAP - Your ZyWALL accepts either CHAP or PAP when requested by

the remote node.

• CHAP - Your ZyWALL accepts CHAP only.

• PAP - Your ZyWALL accepts PAP only.

• MSCHAP - Your ZyWALL accepts MSCHAP only.

• MSCHAP-V2 - Your ZyWALL accepts MSCHAP-V2 only.

• Type the User Name given to you by your ISP. You can use alphanumeric and -

_@$./ characters, and it can be up to 31 characters long.

• Type the Password associated with the user name. Use up to 64 ASCII

characters except the [] and ?. This field can be blank.

• Select Nailed-Up if you do not want the connection to time out. Otherwise,

type the Idle Timeout in seconds that elapses before the router automatically

disconnects from the PPPoE server.