User manual

Chapter 33 Anti-Virus
ZyWALL USG 300 User’s Guide
582
The following table describes the labels in this screen.
33.4 Anti-Virus Black List or White List Add/Edit
From the Configuration > Anti-X > Anti-Virus > Black/White List > Black
List (or White List) screen, click the Add icon or an Edit icon to display the
following screen.
• For a black list entry, enter a file pattern that should cause the ZyWALL to log
and delete a file.
• For a white list entry, enter a file pattern that should cause the ZyWALL to allow
a file.
Figure 424 Configuration > Anti-X > Anti-Virus > Black/White List > Black List (or
White List) > Add
Table 153 Configuration > Anti-X > Anti-Virus > Black/White List > Black List
LABEL DESCRIPTION
Enable Black
List
Select this check box to log and delete files with names that match the
black list patterns. Use the black list to log and delete files with names
that match the black list patterns.
Add Click this to create a new entry.
Edit Select an entry and click this to be able to modify it.
Remove Select an entry and click this to delete it.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
Status The activate (light bulb) icon is lit when the entry is active and dimmed
when the entry is inactive.
# This is the entry’s index number in the list.
File Pattern This is the file name pattern. If a file’s name that matches this pattern,
the ZyWALL logs and deletes the file.
Apply Click Apply to save your changes.
Reset Click Reset to return the screen to its last-saved settings.