User manual

Chapter 8 L2TP VPN Example
ZyWALL USG 300 User’s Guide
192
inside it. The L2TP tunnel itself does not need encryption since it is inside the
encrypted IPSec VPN tunnel.
Figure 165 Connect ZyWALL L2TP: Security > Advanced > Warning
11 Click Networking. Set the Type of VPN to L2TP IPSec VPN and click IPSec
Settings.
Figure 166 L2TP to ZyWALL Properties > Networking
12 Select Use preshared key for authentication and enter the pre-shared key of
the VPN gateway configuration that the ZyWALL is using for L2TP VPN (top-secret
in this example). Click OK to close the IPSec Settings window and then click OK
again to close the Properties window.
Figure 167 L2TP to ZyWALL Properties > Networking > IPSec Settings