User's Manual
Table Of Contents
- ARMOR X1 (WAP6806)
- User’s Guide
- Technical Reference
WAP6806 User’s Guide
83
CHAPTER 15
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
• Power, Hardware Connections, and LED
• WAP6806 Access and Login
• Internet Access
• Resetting the WAP6806 to Its Factory Defaults
• Wireless Problems
15.1 Power, Hardware Connections, and LED
The WAP6806 does not turn on. The LED does not turn on.
1 Make sure the WAP6806 is plugged in to an appropriate power source. Make sure the power source
is turned on.
2 Disconnect and re-connect the power adaptor or cord to the WAP6806.
3 If the problem continues, contact the vendor.
The LED does not behave as expected.
1 Make sure you understand the normal behavior of the LED. See Table 1 on page 11.
2 Check the hardware connections. See the Quick Start Guide.
3 Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4 Disconnect and re-connect the power adaptor to the WAP6806.
5 If the problem continues, contact the vendor.