User's Manual

Chapter 14 Maintenance
WAP6806 User’s Guide
77
The following table describes the labels in this menu.
14.3.2 Time Setting Screen
Use this screen to configure the WAP6806’s time based on your local time zone. To change your
WAP6806’s time and date, click Maintenance > System > Time Setting. The screen appears as
shown.
Figure 61 Maintenance > System > Time Setting
The following table describes the labels in this menu.
Table 33 Maintenance > System > General
LABEL DESCRIPTION
Old Password Type the default password or the existing password you use to access the system in this field.
New Password Type your new system password (up to 30 characters).
Confirm New
Password
Type the new password again in this field.
Confirm Click Confirm to save your changes.
Reset Click Reset to reload the previous configuration for this screen.
Table 34 Maintenance > System > Time Setting
LABEL DESCRIPTION
Current Time and Date
Current Time This field displays the current time and date of your WAP6806.
NTP Server
NTP Server IP
Address 1
Enter the IP address or URL of an available time server and synchronize the date and time
with the time server.
NTP Server IP
Address 2
Enter the IP address or URL of an available time server and synchronize the date and time
with the time server.
Time Zone Setting