User's Manual
Table Of Contents
- NWA5000/WAC6500 Series
- User’s Guide
- Technical Reference
- Dashboard
- Monitor
- Network
- Wireless
- User
- AP Profile
- MON Profile
- WDS Profile
- Certificates
- System
- Log and Report
- File Manager
- Diagnostics
- LEDs
- Reboot
- Shutdown
- Troubleshooting
- Importing Certificates
- IPv6
- Customer Support
- Legal Information
- Index
Chapter 1 Introduction
NWA5000 / WAC6500 Series User’s Guide
15
Figure 2 Dual-Radio Application
1.1.4 Root AP
In Root AP mode, the NWA/WAC (Z) can act as the root AP in a wireless network and also allow
repeaters (X and Y) to extend the range of its wireless network at the same time. In the figure
below, both clients A, B and C can access the wired network through the root AP.
Figure 3 Root AP Application
On the NWA/WAC in Root AP mode, you can have multiple SSIDs active for regular wireless
connections and one SSID for the connection with a repeater (repeater SSID). Wireless clients can