User's Manual

Chapter 4 Tutorials

VSG1435-B101 Series User’s Guide

4a Select the Active check box. Enter the Route Name as R.

4b Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination,

N2.

4c Type 192.168.1.253 (R’s N1 address) in the Gateway IP Address field.

4a Click Apply.

Now B should be able to receive traffic from A. You may need to additionally

configure B’s firewall settings to allow specific traffic to pass through.

4.8 Configuring QoS Queue and Class Setup

This section contains tutorials on how you can configure the QoS screen.

Let’s say you are a team leader of a small sales branch office. You want to

prioritize e-mail traffic because your task includes sending urgent updates to

clients at least twice every hour. You also upload data files (such as logs and e-

mail archives) to the FTP server throughout the day. Your colleagues use the

Internet for research, as well as chat applications for communicating with other

branch offices.

In the following figure, your Internet connection has an upstream transmission

bandwidth of 10,000 kbps. For this example, you want to configure QoS so that e-

mail traffic gets the highest priority with at least 5,000 kbps. You can do the

following:

• Configure a queue to assign the highest priority queue (1) to e-mail traffic going

to the WAN interface, so that e-mail traffic would not get delayed when there is

network congestion.

• Note the IP address (192.168.1.23 for example) and/or MAC address

(AA:FF:AA:FF:AA:FF for example) of your computer and map it to queue 7.