User's Manual

Chapter 8 Home Networking
VSG1435-B101 Series User’s Guide
138
Use the following screen to configure the UPnP settings on your ZyXEL Device.
Click Network Settings > Home Networking > UPnP to display the screen
shown next.
Figure 48 Network Settings > Home Networking > UPnP
The following table describes the labels in this screen.
8.5 Installing UPnP in Windows Example
This section shows how to install UPnP in Windows Me and Windows XP.
Installing UPnP in Windows Me
Follow the steps below to install the UPnP in Windows Me.
1 Click Start and Control Panel. Double-click Add/Remove Programs.
Table 27 Network Settings > Home Networking > UPnP
LABEL DESCRIPTION
UPnP Select Enable to activate UPnP. Be aware that anyone could use a
UPnP application to open the web configurator's login screen without
entering the ZyXEL Device's IP address (although you must still enter
the password to access the web configurator).
UPnP NAT-T
State
Select Enable to allow UPnP-enabled applications to automatically
configure the ZyXEL Device so that they can communicate through the
ZyXEL Device by using NAT traversal. UPnP applications automatically
reserve a NAT forwarding port in order to communicate with another
UPnP enabled device; this eliminates the need to manually configure
port forwarding for the UPnP enabled application.
Apply Click Apply to save your changes.