User's Manual

Chapter 7 Wireless
VSG1435-B101 Series User’s Guide
109
7.5 The WPS Screen
Use this screen to configure WiFi Protected Setup (WPS) on your ZyXEL Device.
WPS allows you to quickly set up a wireless network with strong security, without
having to configure security settings manually. Set up each WPS connection
between two devices. Both devices must support WPS. See Section 7.9.9.3 on
page 126 for more information about WPS.
Note: The ZyXEL Device applies the security settings of the SSID1 profile (see
Section 7.2 on page 96). If you want to use the WPS feature, make sure you
have set the security mode of SSID1 to WPA-PSK, WPA2-PSK or No Security.
Click Network Settings > Wireless > WPS. The following screen displays.
Select Enable and click Apply to activate the WPS function. Then you can
configure the WPS settings in this screen.
Figure 32 Network Settings > Wireless > WPS
The following table describes the labels in this screen.
Table 17 Network Settings > Wireless > WPS
LABEL DESCRIPTION
Enable WPS Select Enable to activate WPS on the ZyXEL Device.
Method 1 Use this section to set up a WPS wireless network using Push Button
Configuration (PBC).