User's Manual
Table Of Contents
- P-663HN-51
- Introduction
- Advanced
- WAN Setup
- 5.1 WAN Overview
- 5.2 Traffic Shaping
- 5.3 WAN
- 5.4 WAN ATM PVC Configuration and QoS
- 5.5 Connection Types
- 5.6 Encapsulation
- 5.7 WAN Connection Type and Encapsulation Mode
- 5.8 NAT
- 5.9 Nailed-Up Connection (PPP)
- 5.10 PPPoA WAN Connection Setup
- 5.11 PPPoE WAN Connection Setup
- 5.12 MER WAN Connection Setup
- 5.13 IPoA WAN Connection Setup
- 5.14 Bridge WAN Connection Setup
- 5.15 IGMP Multicast
- 5.16 NAT, IGMP Multicast, and WAN Service
- 5.17 WAN Setup Summary
- LAN Setup
- Network Address Translation (NAT) Screens
- Security
- Parental Control (Blocking Schedule)
- Quality of Service (QoS)
- Routing
- RIP
- DNS Setup
- Dynamic DNS Setup
- DSL Setup
- Interface Group
- Certificates
- Wireless LAN
- WAN Setup
- Diagnostics and Management
- Troubleshooting and Specifications
- Appendices and Index
Chapter 21 Logs
P-663HN-51 User’s Guide
180
21.3 Viewing the System Log
Click Management > System Log > View System Log to view the ZyXEL
Device’s system logs.
Figure 90 Management > System Log > View System Log
The following table describes the fields in this screen.
Table 63 Management > System Log > View System Log
LABEL DESCRIPTION
Date/Time This field displays when the log was recorded.
Facility This is the log’s category.
Severity This is the event’s degree of seriousness.
Message This field states the reason for the log.
Refresh Click Refresh to renew the log screen.
Close Click this to close the window.