User's Manual Part 2

P-660HW-T and P-660H-T Series Quick Start Guide
7
Note: You will only see the next two screens in Routing mode.
3 Wireless Configuration (P-660HW-T only)
WPA-PSK encryption is preferred to WEP because it has user authentication and improved data encryption. If
you don’t have WPA-capable wireless clients, configure WEP encryption.
• PPPoA • RFC1483
3 Verify your
LAN and
WAN
settings.
To change the
LAN settings,
click Change
LAN
Configuration;
otherwise click
Save Settings to
save the
configuration
and go to the
final wizard
screen.If you
change the
Prestige’s LAN IP address, you must use the new IP
address if you want to access the web configurator
again.
4 Click Save Settings in the screen shown in step
3 to go to the final wizard screen.The Prestige
automatically tests the connection to the
computer(s) connected to the LAN port. To test
the connection from the Prestige to the ISP, click
Start Diagnose. Otherwise click Return to Main
Menu to go back to the main screen.