User's Manual Part 1

P-660H/HW/W-T Series User’ Guide
Chapter 4 LAN Setup 68
4.3 Configuring LAN
Click LAN to open the LAN Setup screen. See Section 4.1 on page 62 for background
information.
Figure 17 LAN Setup
The following table describes the fields in this screen.
Table 11 LAN Setup
LABEL DESCRIPTION
DHCP
DHCP If set to Server, your Prestige can assign IP addresses, an IP default gateway
and DNS servers to Windows 95, Windows NT and other systems that support
the DHCP client.
If set to None, the DHCP server will be disabled.
If set to Relay, the Prestige acts as a surrogate DHCP server and relays DHCP
requests and responses between the remote server and the clients. Enter the IP
address of the actual, remote DHCP server in the Remote DHCP Server field in
this case.
When DHCP is used, the following items need to be set:
Client IP Pool
Starting Address
This field specifies the first of the contiguous addresses in the IP address pool.