User's Manual Part 1

P-660H/HW/W-T Series User’ Guide

419 Appendix K

Use 0 to not record logs for that category, 1 to record only logs for that

category, 2 to record only alerts for that category, and 3 to record both

logs and alerts for that category. Not every parameter is available with

every category.

5 Step 5.Use the sys logs save command to store the settings in the Prestige (you must do

this in order to record logs).

Displaying Logs

• Use the sys logs display command to show all of the logs in the Prestige’s log.

• Use the sys logs category display command to show the log settings for all of the log

categories.

• Use the sys logs display [log category] command to show the logs in an individual

Prestige log category.

• Use the sys logs clear command to erase all of the Prestige’s logs.

Log Command Example

This example shows how to set the Prestige to record the access logs and alerts and then view

the results.

ras> sys logs load

ras> sys logs category access 3

ras> sys logs save

ras> sys logs display access

#.time source destination notes

message

0|06/08/2004 05:58:21 |172.21.4.154 |224.0.1.24 |ACCESS

BLOCK