User Manual

Chapter 6 Wireless LAN

NWA1120 Series User’s Guide

Select a profile you want to configure and click Edit.

Figure 40 MAC Filter: Edit

The following table describes the labels in this screen.

6.10 Technical Reference

This section provides technical background information about the topics covered in this chapter.

Refer to Appendix E on page 187 for further readings on Wireless LAN.

Table 23 Wireless LAN > MAC Filter

LABEL DESCRIPTION

Profile Name This is the name that identifying this profile.

Access Control Mode Select Disabled if you do not want to use this feature.

Select Allow to permit access to the NWA. MAC addresses not listed will be denied

access to the NWA.

Select Deny to block access to theNWA. MAC addresses not listed will be allowed to

access the NWA.

# This is the index number of the MAC address listed.

MAC Address Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the wireless station to be

allowed or denied access to the NWA.

Back Click Back to return to the previous screen.

Apply Click Apply to save your changes.

Cancel Click Cancel to begin configuring this screen afresh.