User's Manual Part 1

Chapter 13 Applications
NBG6817 User’s Guide
134
Figure 92 Expert Mode > Applications > File Sharing > SAMBA
The following table describes the labels in this screen.
Table 48 Expert Mode > Applications > File Sharing > SAMBA
LABEL DESCRIPTION
SAMBA Setup
Enable SAMBA Select this to enable file sharing through the NBG6817 using Windows Explorer or by
browsing to your work group.
Name Specify the name to identify the NBG6817 in a work group.
Work Group You can add the NBG6817 to an existing or a new workgroup on your network. Enter the
name of the workgroup which your NBG6817 automatically joins. You can set the
NBG6817’s workgroup name to be exactly the same as the workgroup name to which
your computer belongs to.
Note: The NBG6817 will not be able to join the workgroup if your local area network has
restrictions set up that do not allow devices to join a workgroup. In this case, contact
your network administrator.
Description Enter the description of the NBG6817 in a work group.
Require username
and password
Select Yes to need a user account for access to the connected USB stick from any
computer. Otherwise, select No.
User Accounts Before you can share files you need a user account. Configure the following fields to set
up a file-sharing account.
# This is the index number of the user account.
Enable This field displays whether a user account is activated or not. Select the check box to
enable the account. Clear the check box to disable the account.
User Name Enter a user name that will be allowed to access the shared files. You can enter up to 20
characters. Only letters and numbers allowed.
Password Enter the password used to access the shared files. You can enter up to 20 characters.
Only letters and numbers are allowed. The password is case sensitive.