User's Manual Part 2

Chapter 23 Maintenance
NBG6716 User’s Guide
167
The following table describes the labels in this screen.
23.4 Password Screen
It is strongly recommended that you change your NBG6716's password.
If you forget your NBG6716's password (or IP address), you will need to reset the device. See
Section 23.8 on page 172 for details.
Click Maintenance > Password. The screen appears as shown.
Figure 119 Maintenance > Password
The following table describes the labels in this screen.
Table 68 Maintenance > General
LABEL DESCRIPTION
System Name System Name is a unique name to identify the NBG6716 in an Ethernet network.
Domain Name Enter the domain name you want to give to the NBG6716.
Administrator
Inactivity Timer
Type how many minutes a management session can be left idle before the session times
out. The default is 5 minutes. After it times out you have to log in with your password
again. Very long idle timeouts may have security risks. A value of "0" means a
management session never times out, no matter how long it has been left idle (not
recommended).
Apply Click Apply to save your changes back to the NBG6716.
Cancel Click Cancel to begin configuring this screen afresh.
Table 69 Maintenance > Password
LABEL DESCRIPTION
Password Setup Change your NBG6716’s password (recommended) using the fields as shown.
Old Password Type the default password or the existing password you use to access the system in
this field.
New Password Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm Type the new password again in this field.
Apply Click Apply to save your changes back to the NBG6716.
Cancel Click Cancel to begin configuring this screen afresh.