User`s guide

Chapter 55 Virtual Channel Commands
IES-612-51 User’s Guide
366
55.6.3 PAE PVC Session Command Example
The following example displays the settings for port 1.
Figure 202 PAE PVC Session Command Example
55.6.4 PAE PVC Counter Command Example
The following example displays the statistics for port 1.
Figure 203 PAE PVC Counter Command Example
Each value is described below.
ras> adsl paepvc session 1
pvc 1-1/33
session state : down
session id : 0
session uptime: 0 secs
acname :
srvcname :
ras> adsl paepvc counter 1
pvc 1-1/33
tx rx
---------------- ----------------
ppp lcp config-request : - 0
ppp lcp echo-request : - 0
ppp lcp echo-reply : - 0
pppoe padi : 0 -
pppoe pado : - 0
pppoe padr : 0 -
pppoe pads : - 0
pppoe padt : 0 0
pppoe srvcname error : - 0
pppoe ac system error : - 0
pppoe generic error : 0 0
tx/rx =
The values in these columns are for packets transmitted (tx) or
received (rx) by the IES-612-51.
ppp lcp config-
request
=
The number of config-request PDUs received by the IES-612-
51 from the CPE (client) device.
ppp lcp echo-
request
=
The number of echo-request PDUs received by the IES-612-51
from the CPE (client) device.
ppp lcp echo-
reply
=
The number of echo-reply PDUs received by the IES-612-51
from the CPE (client) device.
pppoe padi =
The number of padi PDUs sent by the IES-612-51 to the BRAS.
pppoe pado =
The number of pado PDUs sent by the BRAS to the IES-612-51.
pppoe padr =
The number of padr PDUs sent by the IES-612-51 to the BRAS.