User`s guide

Chapter 50 Switch and Statistics Commands
IES-612-51 User’s Guide
314
50.2 DSCP Commands
The following table describes the dscp commands. Use these commands to configure the
DiffServ Code Point settings of the IES-612-51’s ports.
50.3 Ethernet Commands
The following table describes the enet commands. Use these commands to configure the
settings of the IES-612-51’s Ethernet ports.
switch dot1x radius secret
<secret>
Sets the RADIUS server secret. H/H
switch dot1x radius show Displays RADIUS server settings. M/L
switch dot1x show [portlist] Displays IEEE 802.1x settings. M/L
statistics dot1x [portlist] Displays the IEEE 802.1x information for the
specified port(s).
M/L
Table 120 IEEE 802.1x Commands (continued)
COMMAND DESCRIPTION P
Table 121 DSCP Commands
COMMAND DESCRIPTION P
switch dscp disable <portlist> Disables DSCP mapping on the specified xDSL or
Ethernet port(s).
M/H
switch dscp enable <portlist> Enables DSCP mapping on the specified xDSL or
Ethernet port(s).
M/H
switch dscp map set <srccp>
<mappri>
Configures the DSCP-to-802.1p mapping table.
srccp: source code point (0~63). For example,
1,3~5,10~15).
mappri: mapping priority (0~7).
M/H
switch dscp map show Displays the DSCP-to-802.1p mapping table. L/L
switch dscp show [portlist] Displays the DSCP setting for the specified port(s). L/L
Table 122 Enet Commands
COMMAND DESCRIPTION P
switch enet disable <portlist> Turns off the specified Ethernet port(s). H/H
switch enet enable <portlist> Turns on the specified Ethernet port(s). H/H
switch enet name <portlist>
<name>
Sets the name of the specified Ethernet port(s). H/H
switch enet reset <portlist> Resets the Ethernet interface. H/H
switch enet show Displays the Ethernet port settings. M/L
switch enet speed <portlist>
<1000fiber|1000copper|100coppe
r|auto>
Sets the connection speed of the specified Ethernet
port(s).
H/H
statistics enet Displays Ethernet port settings and statistics. M/L