User`s guide

Chapter 41 How to Access and Use the CLI
IES-612-51 User’s Guide
260
Copy and Paste Commands
You can copy and paste commands directly from this document into your terminal emulation
console window (such as HyperTerminal). Use right-click (not [CTRL]-[V]) to paste your
command into the console window as shown next.
41.4 Using Shortcuts and Getting Help
This table identifies some shortcuts in the CLI, as well as how to get help.
Use the help command to view the executable commands on the IES-612-51. Follow these
steps to create a list of supported commands:
1 Log into the CLI.
2 Type help and press [ENTER]. A list comes up which shows all the commands
available for this device.
41.5 Command Privilege Levels
There is a high, middle or low privilege level for each command.
High privilege commands are only available to administrators with high privilege access. High
privilege commands include things like creating administrator accounts, restarting the system
and resetting the system to its factory defaults. Administrators with high privilege access can
use all commands including the lower privilege commands.
Administrators with middle privilege access can use middle or low privilege commands.
Table 93 CLI Shortcuts and Help
COMMAND / KEY(S) DESCRIPTION
yz (up/down arrow keys) Scrolls through the list of recently-used commands. You can edit
any command or press [ENTER] to run it again.
? Displays the keywords and/or input values that are allowed in
place of the ?.
help Displays the (full) commands that are allowed in place of help.
ras> help
sys adsl alarm switch
ip statistics config exit
ras>