User's Guide

ManualsBrandsZyXEL Communications ManualsElectronicsWireless N300 4-port USB Ethernet Gateway

Table Of Contents

Contents Overview
Table of Contents
Introduction
- 1.1 Overview
- 1.2 Applications
- 1.3 Ways to Manage the EMG1302-R10A
- 1.4 Good Habits for Managing the EMG1302-R10A
- 1.5 LEDs
- 1.6 The WPS Button
- 1.7 Wall Mounting
Introducing the Web Configurator
- 2.1 Overview
- 2.2 Login Accounts
- 2.3 Accessing the Web Configurator
- 2.4 Resetting the EMG1302-R10A
  - 2.4.1 Procedure to Use the RESET Button
Quick Start
- 3.1 Overview
- 3.2 Quick Start Setup
Monitor
- 4.1 Overview
- 4.2 What You Can Do
- 4.3 The Log Screen
  - 4.3.1 View Log
  - 4.3.2 Log Setting
- 4.4 DHCP Table
- 4.5 Packet Statistics
- 4.6 WLAN Station Status
Router Mode
- 5.1 Overview
- 5.2 Router Mode Status Screen
  - 5.2.1 Navigation Panel
Tutorials
- 6.1 Overview
- 6.2 Set Up a Wireless Network with WPS
  - 6.2.1 Push Button Configuration (PBC)
  - 6.2.2 PIN Configuration
- 6.3 Configure Wireless Security without WPS
  - 6.3.1 Configure Your Notebook
- 6.4 Using Multiple SSIDs on the EMG1302-R10A
  - 6.4.1 Configuring Security Settings of Multiple SSIDs
WAN
- 7.1 Overview
- 7.2 What You Can Do
- 7.3 What You Need To Know
  - 7.3.1 Configuring Your Internet Connection
  - 7.3.2 Multicast
- 7.4 Management WAN
  - 7.4.1 Add/Edit Internet Connection
  - 7.4.2 Bridge Encapsulation
- 7.5 Advanced WAN Screen
- 7.6 IPv6 Screen
Wireless LAN
- 8.1 Overview
- 8.2 What You Can Do
- 8.3 What You Should Know
- 8.4 General Wireless LAN Screen
- 8.5 Wireless Security
  - 8.5.1 No Security
  - 8.5.2 WPA2-PSK
- 8.6 More AP
  - 8.6.1 More AP Edit
- 8.7 MAC Filter
- 8.8 Wireless LAN Advanced Screen
- 8.9 Quality of Service (QoS) Screen
- 8.10 WPS Screen
- 8.11 WPS Station Screen
- 8.12 Scheduling Screen
- 8.13 WDS
LAN
- 9.1 Overview
- 9.2 What You Can Do
- 9.3 What You Need To Know
  - 9.3.1 IP Pool Setup
  - 9.3.2 LAN TCP/IP
- 9.4 LAN IP Screen
DHCP Server
- 10.1 Overview
- 10.2 What You Can Do
- 10.3 What You Need To Know
- 10.4 The DHCP General Screen
- 10.5 The DHCP Advanced Screen
- 10.6 The DHCP Client List Screen
Quality of Service (QoS)
- 11.1 Overview
  - 11.1.1 What You Can Do in the QoS Screens
  - 11.1.2 What You Need to Know About QoS
- 11.2 The Quality of Service General Screen
- 11.3 The Rule-based QoS Screen
  - 11.3.1 Adding a Rule
- 11.4 QoS Technical Reference
NAT
- 12.1 Overview
- 12.2 What You Can Do
- 12.3 What You Need To Know
- 12.4 The NAT General Screen
- 12.5 The NAT Port Forwarding Screen
- 12.6 The NAT Trigger Port Screen
- 12.7 The ALG Screen
DDNS
- 13.1 Overview
- 13.2 The DDNS General Screen
Routing
- 14.1 Overview
- 14.2 Static Route Screen
  - 14.2.1 Add/Edit Static Route Screen
- 14.3 The Dynamic Routing Screen
Interface Group
- 15.1 Overview
- 15.2 The Interface Group Screen
  - 15.2.1 Add Interface Group
Security
- 16.1 Overview
- 16.2 What You Can Do
- 16.3 What You Need To Know
- 16.4 The Firewall General Screen
- 16.5 The Firewall Services Screen
Content Filtering
- 17.1 Overview
- 17.2 What You Need To Know
- 17.3 Content Filter
IPv6 Firewall
- 18.1 Overview
- 18.2 The IPv6 Firewall Screen
Remote Management
- 19.1 Overview
- 19.2 What You Need to Know
  - 19.2.1 Remote Management and NAT
- 19.3 What You Can Do
- 19.4 The WWW Screen
- 19.5 The Telnet Screen
- 19.6 The SNMP Screen
- 19.7 The TR069 Screen
Universal Plug-and-Play (UPnP)
- 20.1 Overview
- 20.2 What You Need to Know
  - 20.2.1 NAT Traversal
  - 20.2.2 Cautions with UPnP
- 20.3 UPnP Screen
- 20.4 Technical Reference
  - 20.4.1 Using UPnP in Windows XP Example
  - 20.4.2 Web Configurator Easy Access
Maintenance
- 21.1 Overview
- 21.2 What You Can Do
- 21.3 General Screen
- 21.4 Account Screen
  - 21.4.1 Account Setup Screen
- 21.5 Time Setting Screen
- 21.6 Firmware Upgrade Screen
- 21.7 Configuration Backup/Restore Screen
- 21.8 Restart Screen
Troubleshooting
- 22.1 Overview
- 22.2 Power, Hardware Connections, and LEDs
- 22.3 EMG1302-R10A Access and Login
- 22.4 Internet Access
- 22.5 Resetting the EMG1302-R10A to Its Factory Defaults
- 22.6 Wireless Router/AP Troubleshooting
Customer Support
Pop-up Windows, JavaScript and Java Permissions
Wireless LANs
Common Services
Legal Information
Index

Chapter 5 Router Mode

EMG1302-R10A User’s Guide

The following table describes the labels shown in the Status screen.

Click this button to refresh the status screen statistics.

Click this icon to see the Status page. The information in this screen depends on the device

mode you select.

Click this icon to see the Monitor navigation menu.

Click this icon to see the Configuration navigation menu.

Click this icon to see the Maintenance navigation menu.

Table 8 Status Screen Icon Key: Router Mode (continued)

ICON DESCRIPTION

Table 9 Status Screen: Router Mode

LABEL DESCRIPTION

Device Information

Host Name This is the device’s host name.

Model Number This is the device’s model number.

Firmware Version This is the firmware version.

WAN Information

- MAC Address This shows the WAN Ethernet adapter MAC Address of your device.

- IP Address This shows the WAN port’s IP address.

- IP Subnet Mask This shows the WAN port’s subnet mask.

- Default Gateway This shows the default gateway address.

- IPv6 Address This shows the WAN port's IPv6 address.

LAN Information

- MAC Address This shows the LAN Ethernet adapter MAC Address of your device.

- IP Address This shows the LAN port’s IP address.

- IP Subnet Mask This shows the LAN port’s subnet mask.

- DHCP This shows the LAN port’s DHCP role - Server or Disable.

- IPv6 Address This shows the LAN port's IPv6 address.

WLAN Information

- WLAN OP Mode This shows the device mode to which the EMG1302-R10A’s wireless LAN is set.

- MAC Address This shows the wireless adapter MAC Address of your device.

- SSID This shows a descriptive name used to identify the EMG1302-R10A in the wireless LAN.

- Channel This shows the channel number which you select manually.

- Security This shows the level of wireless security the EMG1302-R10A is using.

Firewall This shows the firewall enabled or not.

System Status

Item This column shows the type of data the EMG1302-R10A is recording.

Data This column shows the actual data recorded by the EMG1302-R10A.

System Up Time This is the total time the EMG1302-R10A has been on.

Current Date/Time This field displays your EMG1302-R10A’s present date and time.