User Guide Part 1

Chapter 7 Wireless LAN
AMG1312-T Series User’s Guide
89
Figure 27 Network Setting > Wireless > General
The following table describes the labels in this screen.
Table 17 Network Setting > Wireless > General
LABEL DESCRIPTION
Wireless Network Setup
Wireless Select Enable W ir e le ss LAN to activate wireless LAN.
Wireless Network Settings
Wireless
Network Name
(SSID)
The SSID (Service Set IDentity) identifies the service set with which a wireless device is
associated. Wireless devices associating to the access point (AP) must have the same
SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Client Isolation Select this to keep the wireless clients in this SSID from communicating with each other
through the AMG1312-T Series.
MBSSID/LAN
Isolation
Select this to keep the wireless clients in this SSID from communicating with clients in
other SSIDs or wired LAN devices through the AMG1312-T Series.
Select both Client I sola t ion and M BSSI D/ LAN I solation to allow this SSID’s wireless
clients to only connect to the Internet through the AMG1312-T Series.
Channel
Selection
Set the operating channel manually by selecting a channel from the Chann el Sele ction
list or use Aut o to have it automatically determine a channel to use.
Operating
Channel
This field displays the channel the AMG1312-T Series is currently using.
Security Level