user manual

P-660R/H-D Series User’s Guide
Chapter 18 Introducing the SMT 188
18.2 Navigating the SMT Interface
The SMT (System Management Terminal) is the interface that you use to configure your
Prestige.
Several operations that you should be familiar with before you attempt to modify the
configuration are listed in the table below.
24 System Maintenance 24.1 System Status
24.2 System Information and
Console Port Speed
24.2.1 Information
24.2.2 Change Console Port
Speed
24.3 Log and Trace 24.3.1 View Error Log
24.3.2 UNIX Syslog
24.4 Diagnostic
24.5 Backup Configuration
24.6 Restore Configuration
24.7 Upload Firmware 24.7.1 Upload System
Firmware
24.7.2 Upload System
Configuration File
24.8 Command Interpreter Mode
24.9 Call Control 24.9.1 Budget Management
24.10 Time and Date Setting
24.11 Remote Management
25 IP Routing Policy
Setup
25.1 IP Routing Policy Setup 25.1.1 IP Routing Policy
26 Schedule Setup 26.1 Schedule Set Setup
Table 68 SMT Menus Overview (continued)
MENUS SUB MENUS
Table 69 Navigating the SMT Interface
OPERATION KEY STROKE DESCRIPTION
Move down to
another menu
[ENTER] To move forward to a submenu, type in the number of the
desired submenu and press [ENTER].
Move up to a
previous menu
[ESC] Press [ESC] to move back to the previous menu.
Move to a hidden
menu
Press [SPACE
BAR] to change
No to Yes then
press [ENTER].
Fields beginning with "Edit" lead to hidden menus and have a
default setting of No. Press [SPACE BAR] once to change No
to Yes, then press [ENTER] to go to the "hidden" menu.
Move the cursor [ENTER] or [UP]/
[DOWN] arrow
keys.
Within a menu, press [ENTER] to move to the next field. You
can also use the [UP]/[DOWN] arrow keys to move to the
previous and the next field, respectively.