Specification Sheet

ManualsBrandsZurn ManualsShowersZurn Temp-Gard I Tub and Shower 4-Port Mixing Valve

Rev. E Date: 11/25/08 C.N. No.107936

Dwg. No. 92084 Product No. Z7300-SS-HW-MT

AquaSpec

is a registered trademark of Zurn Industries, LLC

ZURN INDUSTRIES, LLC

♦♦

♦ COMMERCIAL BRASS OPERATION

♦♦

♦ 2640 SOUTH WORK STREET

♦♦

♦ FALCONER NY 14733

Phone: 1-716-665-1132

♦♦

♦ Fax: 1-716-665-1135

♦♦

♦ World Wide Web: www.zurn.com

In Canada: ZURN INDUSTRIES LIMITED

♦♦

♦ 3544 Nashua Drive

♦♦

♦ Mississauga, Ontario L4V1L2

♦♦

♦ Phone: 905/405-8272 Fax: 905/405-1292

____________________________

TEMP-GARD III SHOWER UNIT

Z7300-SS-HW-MT

TAG _______

ENGINEERING SPECIFICATIONS: ZURN Z7300-SS-HW-MT

Single handle pressure balancing mixing tub and shower unit, ceramic control cartridge

with stainless steel balancing piston, built in reverse connection capability (To reverse the

hot and cold inlets simply remove cartridge and turn 180

), two service stops / check stops,

and adjustable limit stop. When valve is turned on it must rotate from cold through to the

hot position. All exposed trim and handle are metal with polished nickel chrome plated

surface. Valve supplied with standard hand/wall shower head, hand/wall unit, 60"[1524mm]

flexible metal hose 24"[610mm] mounting bar, supply elbow and flange. The valve inlets,

shower and tub outlet are all standard with 1/2" NPT female thread connections. The 1/2"

copper sweat options must be specified as shown below.

OPTIONS (Check/specify appropriate options)Use with Z7300 prefix

Suffix Description

___ -CPVC 1/2" Male NPT by CPVC Female Adaptors, shipped loose to be

installed in the field.

___ -EXT Extension Kit, Extends Valve Out by 1".

___ -PEX 1/2" Male NPT by PEX Adaptors, shipped loose to be installed

in the field.

___ -SSC 1/2" Female Copper Sweat Connections w/ Service Stops

___ -ST Sierra Series Decorative Metal Trim

___ -VB In-Line Vacuum Breaker

___ -WF Wall Mounting Flange For Fiberglass or Panel Wall Installation

___ - Handwall Options (see Z7000-HW)

Note: All dimensions are for reference only. Do not use for pre-plumbing.

Parts shown as hidden lines are supplied by others.

Additional Options

___ Z7000-SC Pair of Dual Spring Check Valves

STANDARDS

Tested to meet the following standards for

valves and plumbing fittings:

ASSE Standard No. 1016

ASME A112.18.1 / CSA B125.1

IAPMO

Listed

Meets or Exceeds ANSI A117.1M standard

for physically handicapped

Summary of content (1 pages)

PAGE 1
____________________________ TEMP-GARD III SHOWER UNIT Z7300-SS-HW-MT TAG _______ ENGINEERING SPECIFICATIONS: ZURN Z7300-SS-HW-MT Single handle pressure balancing mixing tub and shower unit, ceramic control cartridge with stainless steel balancing piston, built in reverse connection capability (To reverse the hot and cold inlets simply remove cartridge and turn 180o), two service stops / check stops, and adjustable limit stop. When valve is turned on it must rotate from cold through to the hot position.