Warranty

ZURN INDUSTRIES, LLC
1801 PITTSBURGH AVENUE, ERIE, PA U.S.A. 16502-1916 PHONE: 855-ONE-ZURN (855-663-9876) FAX: [phone]
www.zurn.com
ONE ZURN TERMS AND CONDITIONS
Price and Terms of Payment
Terms are net, payable 30 days from date of invoice. All pricing in U.S. currency. The Buyer shall pay all sales, consumers, or other applicable taxes. A 1-1/2% monthly
(18% annual) service charge will be added to the outstanding balance of all past due invoices.
Minimum invoice $100.00. Zurn Industries, LLC (“Zurn”) reserves the right to apply a minimum order charge in order to meet the $100.00 minimum invoice requirement. All
orders are subject to credit approval by the Zurn Credit Department prior to the acceptance of an order. Orders may be refused, delivery may be withheld, or shipment
stopped in transit without any liability on Zurn’s part at Zurn’s sole discretion based upon Buyer’s credit worthiness as determined by Zurn.
Freight
Zurn is pleased to provide an industry-leading $3,500 combined freight rate. Please see below for specific policy details.
All sales are F.O.B. seller’s location. Zurn will allow full freight allowance when any of the following conditions are met: 1) any combination of Specification Drainage, Light
Commercial, Commercial Brass or Wilkins orders of $3,500 or more; 2) Linear Drainage and Chemical Drainage orders of $5,000 or more; 3) any Combination of
Specification Drainage, Light Commercial, Commercial Brass, Wilkins, Linear Drainage and Chemical Drainage orders of $5,000 or more; 4) Zurn One Systems orders of
$7,500 or more; 5) fixture only orders totaling $10,000 or more. This full freight allowance applies when the shipment is within the continental United States and has a
single destination of a buyer’s standard address or job location. Routing of shipment shall be determined at the sole direction of Zurn . Shipping dates are estimates and
time of delivery shall not be of the essence of this sale contract. Under no circumstances will the Seller have any responsibility on account of any delays in manufacture,
transportation, or otherwise. Terms of Export Shipment on application.
NOTE:
Any product dimension larger than 92” or any single item weighing more than 3,500 lbs., shall be defined as an oversized and/or overweight product and Zurn’s
standard FFA terms may not apply. Please contact our customer service department for guidance on potential additional shipping charges.
These charges and restrictions apply in addition to Zurn standard terms and conditions for sale unless otherwise agreed upon by the parties.
Limited Warranty
Zurn goods sold hereunder are warranted to be free from defects in material and factory workmanship for the period of time from the date of purchase: AquaVantage®
Flush Valves, AquaFlush® Flush Valves, Commercial Fixtures, Faucets, Showers, and Tubular Brass three years; Chemical Drainage, Linear Drainage, Light Commercial,
Specification Drainage, Zurn Wilkins, and Flush Valve and Tubular Brass decorative finishes one year, PHIX® Cartridge ten years. Where permitted by law,
THE
IMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED TO THE ABOVE IDENTIFIED PERIOD OF TIME AND SHALL BE
LIMITED SOLELY TO THE REPLACEMENT OF THE DEFECTIVE GOODS
. A damaged/broken test cock or ball valve is not considered defective.
Please contact Zurn Customer Care for assistance.
Zurn will replace goods at no cost that prove defective provided Zurn is notified in writing of such defect and the goods are returned prepaid at the specified Zurn location
with evidence that they have been properly maintained and used in accordance with instructions.
ZURN SHALL NOT BE RESPONSIBLE FOR ANY
LABOR CHARGES OR ANY LOSS, INJURY, OR DAMAGES WHATSOEVER, INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR
CONSE QUENTIAL DAMAGES.
The sole and exclusive remedy shall be limited to the replacement of the defective goods. Before installation and use, the
purchaser shall determine the suitability of the product for his intended use and the purchaser assumes all risk and liability whatever in the connection therewith. All weights
stated in Zurn catalogs and lists are approximate and are not guaranteed.
Returned Goods
Standard cataloged material may be returned only with written permission of Zurn. Returned goods are subject to a 25% restocking charge of total saleable material
returned, plus cost of reconditioning, if necessary, to make material sellable. Transportation charges are the responsibility of the Buyer. Credit allowance will be in the form
of merchandise credit only – not cash credit. The value of the return must total at least $100.00 to qualify for credit allowance. No credit will be allowed for parts unless
originally ordered and invoiced as parts. No credit will be allowed for discontinued or made-to-order items. Items that have been specially made are not subject to return or
cancellation except by special negotiation. Material must be returned within one year of invoice date for credit to be issued for Chemical Drainage, Linear Drainage, and
Light Commercial. Material must be returned within two years of invoice date for credit to be issued for Commercial Fixtures, Flush Valve Products, Specification Drainage,
Tubular Brass, and Zurn Wilkins. No credit is allowed for Linear Drainage products that have been cut and Specification Drainage product with auxiliary tappings. Flush
Valve material over two years old will be subject to a 50% handling charge. Flush Valve material over five years old will not be accepted. Light Commercial and
Specification Drainage galvanized material will be credited at value of Dura-Coated cast iron, and chrome plated at value of bronze. Zurn Wilkins damaged/broken test
cocks or ball valves are not considered defective.
Illustrations of Typical Installations
The typical installations for various products found in each product section are intended to illustrate the products and potential options for the use of these products. Under
no circumstances are they to be construed as recommended installation procedures. Consult local codes and project specifications for proper installation instructions.
Shortage/Damage Claims
Notification of material shortages or incorrect filling of orders must be made to Zurn within 10 days of receipt. No claims over three months old will be honored. Buyer agrees
to make all complaints for damage in transit or “short count” directly to the carrier; before the contents are unloaded have the carrier agent’s acknowledgement of such
damage noted on the bill of lading and to present to the carrier its agent’s acknowledgement of such damaged material with formal claim covering said damage.
General
Zurn reserves the right to make changes in design or equipment of any item or product without incurring any obligation on previously sold items, and to discontinue items at
any time, without notice. Possession of this Catalog or other sales literature is not to be construed as an offer to sell. All orders are subject to acceptance by Zurn . Catalog
printed in U.S.A.
Zurn flush valves are designed to comply with Army Corp of Engineers and Naval guide specifications, Military Specification MIL.V.29193 and Federal Specification
WWP541.
Zurn flush valves comply with the following standards: ASME A112.18.1/CSA B125.1, A112.19.5, A112.19.2, A112.19.6, ASSE 1037 and 101 are listed by the following
agencies: Canadian Standards, IAPMO/UPC/CUPC, and CSA 125.3. Zurn flush valves are manufactured from dezincification resistant alloys. For additional compliances,
contact Zurn Industries, LLC, Commercial Brass Operation, or 1-800-997-3876.
Zurn is not responsible for typographical errors. The contents of this guide are subject to revision without notice.
©2015 Zurn Industries, LLC Items in this Guide are covered by Patents and Patents Pending. Registered Trademarks.