User's Manual

ManualsBrandsZTE ManualsElectronicsVDSL CPE

ZXHN H167A

VDSL CPE

User Manual

Manual No:

Edition Time: 2019-1-29

LEGAL INFORMATION

The contents of this document are protected by copyright laws and

international treaties. Any reproduction or distribution of this document or any

portion of this document, in any form by any means, without the prior written

consent of ZTE CORPORATION is prohibited. Additionally, the contents of

this document are protected by contractual confidentiality obligations.

All company, brand and product names are trade or service marks, or

registered trade or service marks, of ZTE CORPORATION or of their

respective owners.

This document is provided “as is”, and all express, implied, or statutory

warranties, representations or conditions are disclaimed, including without

limitation any implied warranty of merchantability, fitness for a particular

purpose, title or non-infringement. ZTE CORPORATION and its licensors shall

not be liable for damages resulting from the use of or reliance on the

information contained herein.

ZTE CORPORATION or its licensors may have current or pending intellectual

property rights or applications covering the subject matter of this document.

Except as expressly provided in any written license between ZTE

CORPORATION and its licensee, the user of this document shall not acquire

any license to the subject matter herein.

ZTE CORPORATION reserves the right to upgrade or make technical change

to this product without further notice.

Users may visit the ZTE technical support website http://support.zte.com.cn to

inquire for related information.

The ultimate right to interpret this product resides in ZTE CORPORATION.

ZTE (USA) INC.

2425 N. Central Expy, Suite 600,Richardson, Texas 75080 United States

Telephone number:+1 972-671-8885

Summary of content (12 pages)

PAGE 1
ZXHN H167A VDSL CPE User Manual Manual No: Edition Time: 2019-1-29 LEGAL INFORMATION Copyright © 2019 ZTE CORPORATION. The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations.
PAGE 2
1 Safety Precautions Notes: Before using the device, read the following safety precautions. ZTE bears no liability to the consequences incurred by violation of the safety instructions.  Usage Cautions Read all the safety cautions carefully before using the device. Only use the accessories included in the package, such as power supply adapter and battery. Do not extend the power cord, otherwise the device will not work.
PAGE 3
Before cleaning, power OFF the device, and unplug all the cables connected to the device, such as power cable, optical fiber, and Ethernet cable. Do not use any liquid or spray to clean the device. Use a soft dry cloth.  Environment Protection Do not dispose the device or battery improperly. Observe the local regulations about the equipment disposal or treatment.
PAGE 4
The symbols below indicate that this product should be reused or recycled and not simply discarded. Please locate and use an appropriate reuse and recycling site. If you need more information on collection, reuse and recycling systems, contact your local or regional waste administration. You may also contact your equipment provider for more information on the environmental performances of these products.
PAGE 5
this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.
PAGE 6
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. 2 Product Specifications The ZXHN H167A is a VDSL2 access device that supports 1.16 Gbps Dual-bandconcurrent 11ac Wi-Fi.
PAGE 7
Table 3-1 describes the indicators on the front panel of the ZXHN H167A Table 3-1 Indicators on the Front Panel Indicator Status Description Power off or the power supply is not OFF connected. Power Power on, The system is performing Solid red self-detection or the self-detection fails. Solid green The device is power on. The equipment is not powered on or the OFF WAN port is disabled. Broadband Solid green The link is activated. OFF No detected data. The device is powered off.
PAGE 8
Indicator Status Solid red OFF 2.4GHz Flashing green Solid green OFF 5GHz Flashing green Solid green OFF WPS Slow Flashing green Fast Flashing green Solid green Description due to idle timeout when PPP dial-on-demand is enabled. Green LED indicates that the routing connection state is up. The WAN connection is dialing up or fails to get online. Device attempted to become IP connected and failed (no DHCP response, no PPPoE response, PPP authentication failed, no IP address from IPCP, etc). 2.
PAGE 9
Interface/Button Description WLAN After pushing the button, the WLAN function will be enabled or disabled. WPS After pushing the button, the WPS function will be enabled.  Rear panel Figure 3-3 shows the interfaces and buttons on the back panel of the ZXHN H167A. Figure 3-3 The Back Panel Interface/Button Description On/Off Power switch, to power on or power off Power Power supply port, It is connected to the power adapter. Reset LAN1–LAN4 DSL the device.
PAGE 10
4 Hardware Connections  Hardware Connections Figure 4-1 shows the devices that are connected to interfaces of the ZXHN H167A Figure 4-1 Cable Connection 4 Troubleshooting  All indicators are OFF when the equipment is powered ON. First make sure that you have inserted the power adapter of the ZXHN H167A into a working power socket and that the ZXHN H167A has been powered ON (the switch button is pressed down).
PAGE 11
phone calls cause a slow online rate? VDSL2 separates voices from data through the frequency division multiplexing technology. Therefore, voices and data run in different paths without mutual interference. Neither the access rate nor conversation quality will fall even if you are in a call and online simultaneously.
PAGE 12
usually the Link indicator on the ZXHN H167A will not be ON. It is suggested to check the following steps one by one: i. First check the quality of incoming cables and incoming cable connectors. ii. Install the ZXHN H167A correctly based on the user guidance. Minimize the number of taps. iii. Check whether the telephone cables and VDSL2 are in good connection or whether the telephone cables are normal. iv. Try to disconnect the splitter and directly connect the ZXHN H167A to the incoming user cable end.