User's Manual

 Dest Port Range: Set the destination port numbers that will be filtered

 Source Port Range: Set the source port numbers that will be filtered.

 Action: Set how to handle the packet if it matches with the rule.

 Comment: Type comment for the filter settings.

Note：Filtering rules are matched one by one, if met this provision, it will not

continue to match the rules listed below.

Click <Apply> to confirm your configuration. Click <Delete> to delete the rule

which you selected. Click <Reset> to clear what you select or input.

To add a new rule:

a) Select Enable and click <Apply> in the Basic Settings area.

b) Input the detail information in the Mac/Ip/Port Filtering area.

c) Click <Apply> in the Mac/Ip/Port Filtering area.

5.7.2 URL Filter

After access MODEM setup page successfully, please click Firewall URL

Filter link to access the following screen: