Operation Manual

103
Setting the external input to
stereo or mono.
Make the following settings if an audio source
with mono output is connected to the external
input.
1. Connect a mono cable to the left
INPUT jack.
2. Press m.
3. Use e to select AUDIO INPUT.
4. Use 3 to select the type of
external input.
Stereo: Receive the left and right channel
inputs as a stereo audio signal
Mono (Lch): Receive the left channel
input as a mono audio signal
Using INPUT send eects
1. Use e to select AUDIO INPUT.
2. Use 1 and 2 to adjust the
amount of each eect send.
These can be set from 0 to 100.
Using the mixer (continued)