17240-1051641-Range_Hood_User_Manual_and_Install_Guide_-_English_-_February_2021_-_WEB

36
Changing the Button Panel
CHANGING PARTS
Installation
Tutorial
Video
HOW TO CHANGE OUT THE BUTTON PANEL
1. Remove baffle/aluminum filters.
2. Locate back of button panel.
3. Remove screws from each side of the button panel.
4. Disconnect button panel from cord connecting to circuit board.
NOTE: Never work on or clean the range hood while power is ON. Always unplug
the unit or switch the electrical breaker to the off position.
Scan Me