Manualshelf

Installation Guide

ManualsBrandsZLINE Kitchen and Bath ManualsAppliancesZLINE 30 in. 1.6 cu. ft. Built-in Convection Microwave Oven in Stainless Steel with Speed and Sensor Cooking
11121314151617181920
Table Of Contents
13
INSTALLATION
GENERAL CABINET REQUIREMENTS:
• 1⁄4” space is required between the side of the appliance and an adjacent wall
or cabinet door when installed at the end of a cabinet run.
• The cabinet base must be flat and capable of supporting the weight (roughly 90
pounds) of your appliance when in use.
• The door will overlap the furniture below by approx 3/16” when opened.
• There must be an air gap of at least 1/4” between the appliance and the
cabinet walls when the appliance is installed, i.e. 1/8” each side.
• A gap of at least 1 3/4” is needed between the wall and the back of the unit for
ample space for the power cord.
MWO-24
MWO-30
Cabinet Requirements