K itchen F aucets Installation Guide and Users Manual
Inspired by the clear, serene waters of the stunning Lake Tahoe, ZLINE Kitchen Faucets provide the ultimate luxury experience at the center of your home. Designed to seamlessly match every kitchen, ZLINE Faucets are offered in a wide selection of contemporary styles and designer finishes. With ergonomic control in mind, these faucets offer the perfect amount of aerated water pressure at 1.8 gal/min, allowing for an ecofriendly and efficient washing experience.
TABLE OF CONTENTS SAFETY INSTRUCTIONS 1 Prior to Installation Safety Tips Installation Preparation Care and Maintenance Notes SPRING FAUCETS 2 Parts Tools Assembly PULL DOWN FAUCETS 6 Parts Tools Assembly DA VINCI (DAV-KF-BN) PULL DOWN FAUCET 11 Parts Tools Dimensions Assembly SINGLE HANDLE FAUCETS 16 Parts Tools Assembly DOUBLE HANDLE FAUCETS 21 Parts Tools Assembly TROUBLESHOOTING 26
Safety Instructions Prior to Installation Make sure that the cold and hot water lines are turned off. Wrap all threaded connections with plumber’s tape. Always wrap in a clockwise direction. Cover your drain to avoid losing parts. Do not disassemble the main faucet body, as it has been installed and commissioned correctly and precisely before delivery to the factory. To keep the faucet from jamming, flush the water pipe before installation. Operating conditions: Working pressure at 0.05-1.
Spring Faucet 2
Spring Faucet Tools: Time required: Wrench Phillips-head screwdriver +/- 45 minutes Bucket Legend: Hot Water Cold Water Warning Plumber’s Tape- Grease Used for a watertight seal on threaded pipe joints.
Spring Faucet Loosen the fixing nut and screws and put aside. Mount faucet to counter top. Plumbers Tape Secure the hardware into place with the Base O-ring, nuts, and screws. 4 Secure the hoses to the hot (red) and cold (blue) lines appropriately.
Spring Faucet spray head spray head Test the faucet. Make sure that the spray head is properly secured. Review the diagram to understand the hot, cold, and open settings.
Pull Down Faucets 6
Pull Down Faucets Tools: Time required: Wrench Phillips-head screwdriver +/- 45 minutes Bucket Legend: Hot Water Cold Water Warning Plumber’s Tape- Grease Used for a watertight seal on threaded pipe joints.
Pull Down Faucets Loosen the fixing nut and screws and put aside. Mount faucet to counter top. Plumbers Tape Secure the hardware into place with the Base O-ring, nuts, and screws. 8 Secure the hoses to the hot and cold lines appropriately.
Pull Down Faucets Drain the valve. Secure the hardware Drain Tighten the the valve. hardware.into place. spray head spray head Test the faucet. Make sure that the spray head is properly secured.
Pull Down Faucets Apply the weight to the center of the hose for even distribution. 10 Review the diagram to understand the hot, cold, and open settings.
Da Vinci Pull Down Faucet (DAV-KF-BN) 1 6 1. Faucet Body 2. Base O-Ring 2 3. Rubber Washer 4. Metal Washer 5. Fixing Nut and Screws 6.
Da Vinci Pull Down Faucet (DAV-KF-BN) Tools: Time required: Wrench Phillips-head screwdriver +/- 45 minutes Bucket Legend: 12 Hot Water Cold Water Warning Plumber’s Tape- Used for a watertight seal on threaded pipe joints.
Da Vinci Pull Down Faucet (DAV-KF-BN) Pull Down Kitchen Faucet Model Da Vinci Series (DAV-KF-BN) 13
Da Vinci Pull Down Faucet (DAV-KF-BN) Hot Cold Turn off the water valves and place a bucket beneath, in case of dripping. Mount the faucet to the counter top. Cold (Blue) Hot (Red) 9/16-24 UNEF Hot Secure the hardware into place with the Base O-ring, nuts, and screws. 14 Cold Attach the hot and cold lines to the valves appropriately.
Da Vinci Pull Down Faucet (DAV-KF-BN) spray head spray head Test the faucet before installing the spray head. Make sure that the spray head is properly secured. Test the faucet. Press the button to switch from stream to spray.
SINGLE HANDLE FAUCETS 16
SINGLE HANDLE FAUCETS Tools: Time required: Wrench Phillips-head screwdriver +/- 45 minutes Bucket Legend: Hot Water Cold Water Warning Plumber’s Tape- Grease Used for a watertight seal on threaded pipe joints.
SINGLE HANDLE FAUCETS Loosen the fixing nut and screws and put aside. Mount faucet to counter top. Plumbers Tape Secure the hardware into place with the Base O-ring, nuts, and screws. 18 Secure the hoses to the hot and cold lines appropriately.
SINGLE HANDLE FAUCETS Test the faucet. Loosen the washer on the spray head. Mount spray head to counter top. Secure the hardware into place with nuts and screws.
SINGLE HANDLE FAUCETS Tighten the hardware. 20 Review the diagram to understand the hot, cold, and open settings.
DOUBLE HANDLE FAUCETS 21
DOUBLE HANDLE FAUCETS Tools: Time required: Wrench Phillips-head screwdriver +/- 45 minutes Bucket Legend: 22 Hot Water Cold Water Warning Plumber’s Tape- Used for a watertight seal on threaded pipe joints.
DOUBLE HANDLE FAUCETS Loosen the fixing nut and washers and put aside. Mount faucet to counter top. Secure the hardware into place with the Base O-ring, nuts, and screws. Secure the hoses to the hot and cold lines appropriately.
DOUBLE HANDLE FAUCETS Loosen the washer on the spray head. Mount spray head to counter top. Secure the hardware into place with nuts and screws. 24 Use the hose to connect the spray head and main faucet head.
DOUBLE HANDLE FAUCETS Review the diagram to understand the hot, cold, and open settings.
Troubleshooting Problem Possible Cause Solution There is leakage under the The locking nut has Unscrew the lever on the handle. come loose. handle by hand. Loosen set screw with a hex wrench. Remove the handle and unscrew trim cap by hand. Tighten locking nut with an adjustable wrench. Water will not shut off Cartridge may be Unscrew the level on the completely. defective. handle by hand. Loosen set screw with a hex wrench. Remove the handle and unscrew trim cap by hand.
Kitchen and Bath Three Locations: 350 Parr Circle Reno, NV 89512 916 Delaware Avenue Marysville, OH 43040 427 Rowland Mill Road Bruceton, TN 38317 www.zlinekitchen.com 1-614-777-5004 1.0.