Use and Care Manual

8 9
Before installing baffle filters, make sure that you insert the grease cup under the
motor blower.
Step 8
Install the two part chimneys on top of the hood. Slide the inside section up until the
vertical vent slots are visible, attach top portion to mounting bracket with screws.
Secure lower chimney portion to the hood with screws provided.
Figure 7
Step 9
Install plastic drip cup by sliding into brackets located at the bottom of the motor.
Install baffle channel and baffle filters. Not all models include baffle channels.
Figure 8
If using a crown molding, follow instructions before attaching ducting and chimney
sections.
Step 1
Attach crown molding bracket to ceiling using hardware provided.
Step 2
Attach ducting and electrical connections.
Step 3
Attach chimney sections to the range hood, then connect to crown molding bracket.
Step 4
Slide crown molding onto crown bracket and secure into place.
Wall Range Hood Installation
Figure 7
Figure 8
Crown Molding Installtion
Installation Tutorial Video