User Manual

ILLUSTRATION
15 MAINTENANCE
ATTENTION
No cleaning, upkeep, checks or maintenance when machine is running
Shut off the machine and let it cool down before start servicing!
The machine does not require intense maintenance. However, to ensure a long lifespan, we strongly
recommend following the upkeep and maintenance plan.
Repairs must be carried out by specialists! Use original ZIPPER parts only!
Ware safety gloves if you mount or demount drills!
Damaged drills may never be straightened or welded!
NOTICE
Only a properly maintained equipment may be a satisfactory tool. Care and maintenance
deficiencies can cause unpredictable accidents and injuries.
Repairs should be performed only by authorized service centers.
Improper operation may damage the equipment or endanger your safety.
15.1 Maintenance plan
Controls for the maintenance of the machine
Loose or lost screws, nuts, bolts Regularly prior to each operation
Damage of any part of the machine Regularly prior to each operation
Damage of drills Regularly prior to each operation
Fuel tank of tightness Regularly prior to each operation
Machine cleaning Regularly after operation
Cleaning spark plug Every 25 working hours
Cleaning air filter Every 20-30 working hours
15.2 Cleaning
Clean the machine and the working attachment from soil, dust, grass, chips, and small twigs, etc.
Clean the machine housing with a wet cloth and a mild cleaning solution.
Put on all coatless flats a thin coat of oil.
NOTICE
The usage of solvents, aggressive chemicals or scouring agents damages the machine housing.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at 31
ZI-ELB70 31
Downloaded from www.Manualslib.com manuals search engine