User manual

OPERATION
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at 34
ZI-ABH1050/1500
14.2 Operation ZI-ABH1050
14.2.1 Insert chisel
(1) Rotate the stop lever (3) 180° clockwise while pulling it toward you.
Next insert the tool shank (1) in the hexagonal hole on the front cover (pic. 1)
(2) Clamp the tool by turning the stop lever (3) half a turn in the opposite direction. (Bild 2)
(3) When removing the tool. Follow the above procedure in reverse order.
14.2.2 Switch on
 Press the Power push button to the start the engine and set the stroke to move.
 By pressing the locking button can be switched to continuous operation.
14.2.3 Switch off
 Take the pressure off switch push button to stop the stroke.
 For continuous operation, press and release the push button switch to release the
fixation.