User's Manual

60
Holiday schedule Figure 4-47
Select the days to be set as holiday as needed. The selected days has yellow background. Step 2
Select from Record and Snapshot, and then click Save. Step 3
On Record or Snapshot interface, click Setting behind Holiday, and then you can set Step 4
detection type and detection period. For details, see "4.4.1.1 Record Schedule."
Click Save. Record and snapshot will be taken according to the set holiday schedule for the Step 5
selected days.
4.4.2 Destination
This section introduces the configurations of storage paths for the records and snapshots.
4.4.2.1 Path
You can select storage paths from Local, FTP, or NAS for the records and snapshots.
Select Setting > Storage > Destination > Path. Step 1
The Path interface is displayed. See Figure 4-48.
Path Figure 4-48