User's Manual

55
For other parameter descriptions, see Table 4-18.
Table 4-19 SD card parameter descriptions
Parameter
Description
Event Type
Select SD card abnormality from no SD card, SD card error, and capacity warning.
Enable
Select Enable check box to enable SD card abnormality detection.
Capacity
Limit
This parameter is available when Capacity Warning is selected in Event Type.
Configure the free space percentage, and if the free space in the SD card is lower
than the defined percentage, the alarm is triggered.
Click Save. Step 3
4.3.2.2 Network
When any abnormality happens to the network, the alarm will be triggered.
Select Setting > Event > Abnormality > Network. Step 1
The Network interface is displayed. See Figure 4-40.
Network Figure 4-40
Configure parameters. See Table 4-20. Step 2
For other parameter descriptions, see Table 4-18.
Table 4-20 Network parameter description
Parameter
Description
Event Type
Select network abnormality from disconnection and IP conflict.
Enable
Select Enable check box to enable to network card abnormality detection.
Click Save. Step 3
4.3.2.3 Illegal Access
When the entering times of wrong password have exceeded the defined times, the alarm is
triggered.
Select Setting > Event > Abnormality > Illegal Access. Step 1