User's Manual

44
SMTP (Email) Figure 4-27
Configure parameters. See Table 4-12. Step 2
Table 4-12 SMTP (Email) parameter descriptions
Parameter
Description
SMTP Server
IP address of SMTP server that sends
emails.
For the detailed configuration, see
Table 4-13.
Port
Port number of the SMTP server that
sends emails. The default value is 25.
Username
Sender's email username.
Password
Sender's email password.
Anonymity
By enabling this function, the sender's information is not displayed in the email.
You can auto log in anonymously, and do not need to enter the username,
password and the sender information.
Sender
Sender's email address.
Authentication
Select Authentication from None, SSL and TLS. TLS is set by default.
For the detailed configuration, see Table 4-13.
Title
Enter no more than 60 characters in Chinese, English, and Arabic numerals.
Attachment
Select the check box to support attachment in the email.
Mail Receiver
Receiver's email address. Support 3 addresses at most.
Health Mail
The system sends test mails to check if the connection is successfully configured.
Select Health Mail, configure the Update Period, and then the system sends test
mails as the defined period.
Test
Test the email sending and receiving function. If the configuration is correct, you
will receive test mail. Save email configuration before running the test.
For the configuration of major mailboxes, see Table 4-13.