User's Manual

72
Name
Description
Accumulator
voltage
In the Battery Voltage boxes, enter the minimum percentage of supply
voltage and supply voltage to the device from the vehicle. When the
vehicle is in ACC Off, the voltage supplied to the device is lower than the
preset minimum percentage, the system generates an alarm
Max Speed
If Over Speed is selected, configure this parameter
The upper limit of vehicle speed. When the vehicle speed exceeds this
value, the system generates an alarm
Min Speed
If Low Speed is selected, configure this parameter
The lower limit of vehicle speed. When the vehicle speed is lower than
this value, the system generates an alarm
Configure the alarm linkage action. See4.5.1Alarmfor details.
When Restart System is enabled, the system detects no HDD and restarts after 3
minutes.
Click Apply.
4.5.5 Configuring Alarm Output Settings
Configure the alarm port output type of the Device, including auto, manual, and stop. When
the alarm output port is connected to the alarm device, and alarm is linked with alarm output
function, configure the alarm type as Auto. Then the system starts alarm linkage.
In the main menu, select Alarm > Alarm Output.
The Alarm Out interface is displayed. See Figure 4-53.
Alarm Output
Select alarm output mode.
 Manual: After the alarm linkage is configured, no matter whether there is an
alarm event occurs, the corresponding alarm output port keeps generating
alarm.
 Auto: After the alarm linkage is configured, when an alarm event occurs, the
corresponding alarm output port generates alarm.