User's Manual
Table Of Contents
- Regulatory Information
- Cybersecurity Recommendations
- Foreword
- Important Safeguards and Warnings
- 1 Product Introduction
- 2 Dimension and Installation
- 3 Boot up the Device
- 4 Local Configurations
- 4.1 Initializing Device
- 4.2 Logging into the Device
- 4.3 Quick Configuration
- 4.4 Common Operations
- 4.5 Alarm Configuration
- 4.5.1 Alarm
- 4.5.2 Configuring Video Detection Settings
- 4.5.3 Configuring Alarm Events Settings
- 4.5.4 Abnormality
- 4.5.5 Configuring Alarm Output Settings
- 4.5.6 Searching Alarm Log
- 4.6 System config
- 4.7 System Update
- 4.8 System Maintenance
- 5 Web Operations
- 5.1 Initializing Device
- 5.2 Logging into the Device
- 5.3 Quick configuring
- 5.4 Common operations
- 5.5 System Settings
- 5.6 System Update
- 5.7 System Maintenance
- 6 Operating by DSS
- 7 FAQ
- Appendix 1 Mouse Operations
- Appendix 2 HDD Capacity Calculation
- Appendix 3 Technical parameters
118
IMP/EXP
Select the backup path and click Export.
The system will pop up a message in case of success. Click OK to complete backup.
4.8.6.2 Restoring Configurations
Select Main Menu > SYSTEM > CONFIGURE BACKUP.
The CONFIGURE BACKUP interface is displayed. If the external storage device is
connected before the interface is entered, the system will automatically identify the
information of the external storage device, as shown in Figure 4-105.
If the external storage device is connected after the interface is entered, click
Refresh and the system will recognize the connected external storage device.
IMP/EXP