User's Manual

3.11.2 USB Import

Only data in the USB that was exported from one access controller can be imported into

another access controller.

Select USB > USB Import. Step 1

USB Import Figure 3-17

Select the data type that you want to import. Step 2

Tap OK. Step 3

Data in the USB flash drive will be imported into the access controller.

3.11.3 USB Update

USB flash drive can be used to update the system.

Rename the updating file name to "update.bin", and save the "update.bin" file in the Step 1

root directory of the USB flash drive.

Select USB > USB Update. Step 2

Tap OK. Step 3

The update starts, and the access controller restarts after the update is finished.

Features 3.12

You set privacy, card number reverse, security module, door sensor type, and result feedback.