Lawn Tractor Owner/Operator Manual

7. Fuel

English

■ HOW TO MIX FUEL

Pay attention to agitation.

1. Measure out the quantities of gasoline and oil to be

mixed.

2. Put some of the gasoline into a clean, approved fuel

container.

3. Pour in all of the oil and agitate well.

4. Pour In the rest of gasoline and agitate again for at

least one minute. As some oils may be difficult to

agitate depending on oil ingredients, sufficient

agitation is necessary for the engine to last long. Be

careful that, if the agitation is insufficient, there is an

increased danger of early piston seizing due to

abnormally lean mixture.

5. Indicate the contents on outside of container for

easy identification. To avoid mixing up with raw

gasoline or other containers.

■ FUELING THE UNIT

1. Untwist and remove the fuel cap.

2. Put fuel into the fuel tank to 80% of the full capacity.

3. Fasten the fuel cap securely and wipe up any fuel

spillage around the unit.

1. Select bare ground for fueling.

2. Move at least 10feet (3meters) away from the

fueling point before starting the engine.

3. Stop the engine and let it cool for few minutes

before refueling the unit. At that time, be sure to

sufficiently agitate the mixed gasoline in the

container.

4. Do not smoke or place hot object near fuel.

WARNING

IMPORTANT