User's Manual Part 1

Printer Setup

Select a Data Communication Interface

2/23/09 Xi4 User Guide P1009874-001

Table 4 • Connecting the Printer to a Computer or Network

Interface Connection and Configuration

RS-232 Serial The baud rate, number of data and stop bits, the parity, and the

XON/XOFF or DTR control must match those of the host computer. See

Standard Control Panel Parameters on page 99 to view or change these

parameters.

IEEE 1284

Bidirectional

Parallel

No additional configuration is necessary. An Ethernet print server (if

installed) takes up or covers this port on the printer.