Specifications

Zaxcom TRX-900LT Series Manual Extended Menu

Left Right Switch

This menu turns on the left / right switch mode.

This function allows the wireless user to cause the audio to switch from the left output to the right output

of a stereo RX900 receiver when the key is pressed.

You can select the UP, DOWN, or MENU key to act as the trigger.

IFB Remote Control - this menu will not appear if the IFB settings allow the TRX to go into transmit mode.

This menu turns ON / OFF if the TRX-900 will accept remote control commands via ZaxNet.

IFB Jam Threshold

This menu sets how much the timecode has to jump before a new file is forcibly created.

IMPORTANT: When a new file is created, while a take is in progress, about a half of second of the

audio will be lost.

QRX Program

This is used to update the software on a QRX-100.

To Update the QRX Software:

1. With a computer copy the QRX software onto a formatted micro SD card.

2. Place the card in the transmitter

3. Power up the transmitter.

4. Advance to this menu.

5. Press the INC key.

6. The transmitter will begin to transmit the software to a QRX-100 that is set to receive the software.

The transmitter will continually resend the program until you manually stop it.

PRESS TO SEND

QRX PROG FILE

IFB JAM THRESH

1000 MS (DEFAULT)

ALLOW IFB REMOTE

CONTROL: ON

LR SWITCH MODE

OFF

NOTE: This is only compatible with the RX900S Receiver

ALLOW IFB REMOTE

CONTROL: ON